| |
Product Name  |
Price |
Buy Now |
 |
- Shark Hopup Bucking was originally designed for 470 to prevent double feeding.
- By 3 special "fins" inside the bucking, Shark Hopup Bucking can hold one and only one B.B. tightly in the chamber.
- Madbull found out that this bucking could also enhance the velocity in some AEGs. Although, it doesn't apply to all AEGs and the velocity is not increased in all AEGs.
- Included in the package are two pieces, one rubber, one silicon, along with two Fishbone X Balancers.
|
$13.99 |
 |
 |
- DeepFire Hop-Up Rubber
- Highly durable, direct replacement for original part.
|
$7.99 |
|
 |
- Durable high grip hop up rubber from G&P.
- Nub is included.
|
$6.99 |
|
 |
- This hard type packing is designed to match high power upgrades at 400fps+. High power upgrades require a harder hop-up packing since softer material may deform from the higher power.
- However if your gun shoots below 400fps, then stay with the soft type packing since otherwise this hard type will not grip the BB properly on low power configurations.
|
$12.99 |
 |
 |
- Best used on guns that shoot below 400fps.
- Comes with hop-up nubbing
|
$12.99 |
|
 |
- Thunder Series 60 degree rubber is softer than normal 80-90 degree rubber.
- Comes with 2 buckings and 2 regular nubs m- 2 Pack!
|
$11.99 |
|
 |
- CNC Manufacturing Technology.
- Sets up on the gearbox independently for increased accuracy.
- Tokyo Marui Standard AK.
|
$35.99 |
|
 |
- A single-piece structured chamber stabilizes the muzzle velocity and fits tightly to the barrel base.
- The chamber always aligns to the center.
- Please note that modification of the chamber and lower receiver is required.
|
$37.99 |
|
 |
- ProWin G36 Chamber for Marui G36
- This new G36 Chamber, with full CNC manufacturing technology and, set up on the gearbox independently which provides faster testing and high accuracy when shooting.
- Only includes shell.
|
$31.99 |
|
 |
- All Metal Unit.
- For G&P M249 & MK46 Series ONLY
- Includes New Bucking with Nub and Ring!
|
$40.99 |
|
 |
- Metal chamber set is much more durable and accurate in feeding BBs * Comes with all necessary parts for installation.
- Highly recommended for upgraded AEGs to withstand higher air pressure.
|
$39.99 |
|
 |
- Factory Replacement Hop Up Chamber for KWA M4/M16 only
- Does NOT include bucking or nub.
|
$29.99 |
|
 |
- New G&P upgrade Hop up Chamber/unit.
- Includes Bucking - Neb - Ring!
- Reinforced metals - One piece for metal bodies
- For M16/M4 Models
|
$19.99 |
|
 |
- Another practical innovation from MADBULL, this new metal hop-up unit chamber has 3 functions in 1!
- Features:
1. LED Tracer Unit (Optional and available separately from Madbull)
2. Chamber Lock (Prevents BBs from falling out when you eject magazine)
3. Easy adjustment using new design dial for more stable hop-up
- This set also includes a free MADBULL blue 60 degree SHARK hop-up bucking rubber and Nub.
Note that the chamber lock function works via an O-ring in the BB feed tube that goes up to the firing chamber. The O-ring prevents BB's from falling out of the gun when you pull the magazine out, which is normal in a Marui type gearbox. If you find this causes any problems for you, or you prefer that the 3-4 BB's in the feed tube fall out of the gun during reloads, you can simply remove this O-ring to disable the chamber lock function.
- New hop-up adjustment dial stays in place and won't shift from vibration during full-auto firing, giving you more reliable and consistent hop-up than in traditional guns with slide-type hop-up adjustment lever.
|
$29.99 |
|
 |
- Factory Hop up Chamber for Echo1 E90
|
$19.99 |
|
 |
- The first mass production LED module for Hopup.
- Turns madbull 3in1 hopup into a tracer unit.
- A MadBull Ultimate Hopup needed.
- Features: Voltage: 7.5-12.6v Life 10000+ hrs 1 Watt 8 Blue SMD LED O.C.
- Note: Once pluged with battery, LED module will start consume battery 1 watt.
- You have to unplug the battery to turn it off.
|
$99.99 |
|
Checkout process is SSL encrypted.
